1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
|
/*
* ========================================================
*
* hCore
* Copyright Mahrouss Logic, all rights reserved.
*
* ========================================================
*/
#include <KernelKit/DebugOutput.hpp>
#include <ArchKit/Arch.hpp>
#include <NewKit/Utils.hpp>
namespace hCore
{
namespace Detail
{
constexpr short PORT = 0x3F8;
bool serial_init()
{
HAL::out8(PORT + 1, 0x00); // Disable all interrupts
HAL::out8(PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
HAL::out8(PORT + 0, 0x03); // Set divisor to 3 (lo byte) 38400 baud
HAL::out8(PORT + 1, 0x00); // (hi byte)
HAL::out8(PORT + 3, 0x03); // 8 bits, no parity, one stop bit
HAL::out8(PORT + 2, 0xC7); // Enable FIFO, clear them, with 14-byte threshold
HAL::out8(PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
HAL::out8(PORT + 4, 0x1E); // Set in loopback mode, test the serial chip
HAL::out8(PORT + 0, 0xAE); // Test serial chip (send byte 0xAE and check if
// serial returns same byte)
// Check if serial is faulty (i.e: not same byte as sent)
if (HAL::in8(PORT) != 0xAE)
{
#ifdef __DEBUG__
panic(RUNTIME_CHECK_HANDSHAKE);
#else
return false;
#endif
}
// If serial is not faulty set it in normal operation mode
// (not-loopback with IRQs enabled and OUT#1 and OUT#2 bits enabled)
HAL::out8(Detail::PORT + 4, 0x0F);
return true;
}
}
void system_io_print(const char *bytes)
{
if (!bytes)
return;
SizeT index = 0;
SizeT len = string_length(bytes, 256);
while (index < len)
{
HAL::out8(Detail::PORT, bytes[index]);
++index;
}
}
TerminalDevice kcout(hCore::system_io_print, nullptr);
} // namespace hCore
|
