ADD: Open version, with important changes kept out.

Signed-off-by: Amlal <amlal.elmahrouss@icloud.com>

1 files changed, 145 insertions, 0 deletions

diff --git a/dev/Kernel/HALKit/AMD64/HalDebugOutput.cc b/dev/Kernel/HALKit/AMD64/HalDebugOutput.cc
new file mode 100644
index 00000000..041af9ed
--- /dev/null
+++ b/dev/Kernel/HALKit/AMD64/HalDebugOutput.cc
@@ -0,0 +1,145 @@
+/* -------------------------------------------
+
+	Copyright (C) 2024, Amlal EL Mahrouss, all rights reserved.
+
+------------------------------------------- */
+
+#include <ArchKit/ArchKit.h>
+#include <KernelKit/DebugOutput.h>
+#include <NewKit/Utils.h>
+#include <NewKit/New.h>
+
+namespace Kernel
+{
+	enum CommStatus
+	{
+		kStateInvalid,
+		kStateReady	   = 0xCF,
+		kStateTransmit = 0xFC,
+		kStateCnt	   = 3
+	};
+
+	namespace Detail
+	{
+		constexpr Int16 kPort  = 0x3F8;
+		static Int32	kState = kStateInvalid;
+
+		/// @brief Init COM1.
+		/// @return
+		template <Int16 PORT>
+		bool hal_serial_init() noexcept
+		{
+			if (kState == kStateReady || kState == kStateTransmit)
+				return true;
+
+			HAL::rt_out8(PORT + 1, 0x00); // Disable all interrupts
+			HAL::rt_out8(PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
+			HAL::rt_out8(PORT + 0, 0x03); // Set divisor to 3 (lo byte) 38400 baud
+			HAL::rt_out8(PORT + 1, 0x00); //                  (hi byte)
+			HAL::rt_out8(PORT + 3, 0x03); // 8 bits, no parity, one stop bit
+			HAL::rt_out8(PORT + 2, 0xC7); // Enable FIFO, clear them, with 14-byte threshold
+			HAL::rt_out8(PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
+			HAL::rt_out8(PORT + 4, 0x1E); // Set in loopback mode, test the serial chip
+			HAL::rt_out8(PORT + 0, 0xAE); // Test serial chip (send byte 0xAE and check if
+										  // serial returns same byte)
+
+			// Check if serial is faulty (i.e: not same byte as sent)
+			if (HAL::rt_in8(PORT) != 0xAE)
+			{
+				ke_panic(RUNTIME_CHECK_HANDSHAKE);
+			}
+
+			kState = kStateReady;
+
+			// If serial is not faulty set it in normal operation mode
+			// (not-loopback with IRQs enabled and OUT#1 and OUT#2 bits enabled)
+			HAL::rt_out8(PORT + 4, 0x0F);
+
+			return true;
+		}
+	} // namespace Detail
+
+	TerminalDevice::~TerminalDevice() = default;
+
+	EXTERN_C void ke_io_write(const Char* bytes)
+	{
+#ifdef __DEBUG__
+		Detail::hal_serial_init<Detail::kPort>();
+
+		if (!bytes || Detail::kState != kStateReady)
+			return;
+
+		if (*bytes == 0)
+			return;
+
+		Detail::kState = kStateTransmit;
+
+		SizeT index = 0;
+		SizeT len	= 0;
+
+		index = 0;
+		len	  = rt_string_len(bytes, 255);
+
+		while (index < len)
+		{
+			if (bytes[index] == '\r')
+				HAL::rt_out8(Detail::kPort, '\r');
+
+			HAL::rt_out8(Detail::kPort, bytes[index] == '\r' ? '\n' : bytes[index]);
+			++index;
+		}
+
+		Detail::kState = kStateReady;
+#endif // __DEBUG__
+	}
+
+	EXTERN_C void ke_io_read(const Char* bytes)
+	{
+#ifdef __DEBUG__
+		Detail::hal_serial_init<Detail::kPort>();
+
+		if (!bytes || Detail::kState != kStateReady)
+			return;
+
+		Detail::kState = kStateTransmit;
+
+		SizeT index = 0;
+
+		///! TODO: Look on how to wait for the UART to complete.
+		while (true)
+		{
+			auto in = HAL::rt_in8(Detail::kPort);
+
+			///! If enter pressed then break.
+			if (in == 0xD)
+			{
+				break;
+			}
+
+			if (in < '0' || in < 'A' || in < 'a')
+			{
+				if (in != '@' || in != '!' || in != '?' || in != '.' || in != '/' ||
+					in != ':')
+				{
+					continue;
+				}
+			}
+
+			((char*)bytes)[index] = in;
+
+			++index;
+		}
+
+		((char*)bytes)[index] = 0;
+
+		Detail::kState = kStateReady;
+#endif // __DEBUG__
+	}
+
+	TerminalDevice TerminalDevice::The() noexcept
+	{
+		TerminalDevice out(Kernel::ke_io_write, Kernel::ke_io_read);
+		return out;
+	}
+
+} // namespace Kernel