1 files changed, 0 insertions, 145 deletions
diff --git a/dev/Kernel/HALKit/AMD64/HalDebugOutput.cxx b/dev/Kernel/HALKit/AMD64/HalDebugOutput.cxx
deleted file mode 100644
index d4e2b435..00000000
--- a/dev/Kernel/HALKit/AMD64/HalDebugOutput.cxx
+++ /dev/null
@@ -1,145 +0,0 @@
-/* -------------------------------------------
-
-	Copyright ZKA Technologies.
-
-------------------------------------------- */
-
-#include <ArchKit/ArchKit.hxx>
-#include <KernelKit/DebugOutput.hxx>
-#include <KernelKit/Framebuffer.hxx>
-#include <NewKit/Utils.hxx>
-#include <NewKit/New.hxx>
-
-namespace Kernel
-{
-	enum CommStatus
-	{
-		kStateInvalid,
-		kStateReady	   = 0xCF,
-		kStateTransmit = 0xFC,
-		kStateCnt	   = 3
-	};
-
-	namespace Detail
-	{
-		constexpr short PORT = 0x3F8;
-
-		static int kState = kStateInvalid;
-
-		/// @brief Init COM1.
-		/// @return
-		bool hal_serial_init() noexcept
-		{
-#ifdef __DEBUG__
-			if (kState == kStateReady || kState == kStateTransmit)
-				return true;
-
-			HAL::Out8(PORT + 1, 0x00); // Disable all interrupts
-			HAL::Out8(PORT + 3, 0x80); // Enable DLAB (set baud rate divisor)
-			HAL::Out8(PORT + 0, 0x03); // Set divisor to 3 (lo byte) 38400 baud
-			HAL::Out8(PORT + 1, 0x00); //                  (hi byte)
-			HAL::Out8(PORT + 3, 0x03); // 8 bits, no parity, one stop bit
-			HAL::Out8(PORT + 2, 0xC7); // Enable FIFO, clear them, with 14-byte threshold
-			HAL::Out8(PORT + 4, 0x0B); // IRQs enabled, RTS/DSR set
-			HAL::Out8(PORT + 4, 0x1E); // Set in loopback mode, test the serial chip
-			HAL::Out8(PORT + 0, 0xAE); // Test serial chip (send byte 0xAE and check if
-									   // serial returns same byte)
-
-			// Check if serial is faulty (i.e: not same byte as sent)
-			if (HAL::In8(PORT) != 0xAE)
-			{
-				ke_stop(RUNTIME_CHECK_HANDSHAKE);
-			}
-
-			kState = kStateReady;
-
-			// If serial is not faulty set it in normal operation mode
-			// (not-loopback with IRQs enabled and OUT#1 and OUT#2 bits enabled)
-			HAL::Out8(Detail::PORT + 4, 0x0F);
-#endif // __DEBUG__
-
-			return true;
-		}
-	} // namespace Detail
-
-	EXTERN_C void ke_io_write(const char* bytes)
-	{
-#ifdef __DEBUG__
-		Detail::hal_serial_init();
-
-		if (!bytes || Detail::kState != kStateReady)
-			return;
-		if (*bytes == 0)
-			return;
-
-		Detail::kState = kStateTransmit;
-
-		SizeT index = 0;
-		SizeT len	= 0;
-
-		index = 0;
-		len	= rt_string_len(bytes, 255);
-
-		while (index < len)
-		{
-			if (bytes[index] == '\r')
-				HAL::Out8(Detail::PORT, '\r');
-
-			HAL::Out8(Detail::PORT, bytes[index] == '\r' ? '\n' : bytes[index]);
-			++index;
-		}
-
-		Detail::kState = kStateReady;
-#endif // __DEBUG__
-	}
-
-	EXTERN_C void ke_io_read(const char* bytes)
-	{
-#ifdef __DEBUG__
-		Detail::hal_serial_init();
-
-		if (!bytes || Detail::kState != kStateReady)
-			return;
-
-		Detail::kState = kStateTransmit;
-
-		SizeT index = 0;
-
-		///! TODO: Look on how to wait for the UART to complete.
-		while (true)
-		{
-			auto in = HAL::In8(Detail::PORT);
-
-			///! If enter pressed then break.
-			if (in == 0xD)
-			{
-				break;
-			}
-
-			if (in < '0' || in < 'A' || in < 'a')
-			{
-				if (in != '@' || in != '!' || in != '?' || in != '.' || in != '/' ||
-					in != ':')
-				{
-					continue;
-				}
-			}
-
-			((char*)bytes)[index] = in;
-
-			++index;
-		}
-
-		((char*)bytes)[index] = 0;
-
-		Detail::kState = kStateReady;
-#endif // __DEBUG__
-	}
-
-	TerminalDevice TerminalDevice::The() noexcept
-	{
-		TerminalDevice out(Kernel::ke_io_write, Kernel::ke_io_read);
-		return out;
-	}
-
-} // namespace Kernel